Author Topic: Looky what I found, Popular mechanics article Nov 1987  (Read 6693 times)

0 Members and 1 Guest are viewing this topic.

Offline Midskier

  • Hero Member
  • *****
  • Posts: 429
  • The Busted Knuckle Garage is always open :)
    • Midwest American Skier Boats Parts and Service
  • Boat Make/Model/Year: the ONLY '86 American Skier Volante Barefoot Skier
Midwest American Skier Boats Parts and Service
**219.365.1466**
www.MidwestAmericanSkier.com
midskier@hotmail.com
Buy Barefoot International / Fly High Products at:
www.FootnGear.com  
AWSA Level 1 Certified Water Ski Instructor

Offline phil

  • Gernal Forum Moderator
  • Hero Member
  • ***
  • Posts: 574
    • amskierboats.com
  • Boat Make/Model/Year: 2008 Moomba Outback DD
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #1 on: February 17, 2010, 11:51:14 AM »
Frigin Awesome!!!!

Offline RonT

  • Administrator
  • Hero Member
  • *****
  • Posts: 1202
    • RonTanis
  • Boat Make/Model/Year: American Skier/Eagle V-25/2001
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #2 on: February 17, 2010, 04:35:38 PM »
I remember going ballastic after I moved down to Ocoee to run the plant & this article appeared (test was done several months before publication) I found out we sent a boat to this test with NO BACK SEAT!!!

Offline chrisheile

  • Hero Member
  • *****
  • Posts: 238
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #3 on: February 17, 2010, 05:26:56 PM »
Back seat??  oh yeah. That thing I have to put  in when the kids come over.
2002 American Sker Pro

Offline Joel

  • Hero Member
  • *****
  • Posts: 1022
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #4 on: February 17, 2010, 07:57:10 PM »
Nice article...  Yeah, I'll bet Ron was more than a little miffed that they sent out anything other than thier absolute BEST boat!  I dont think my 91 Advance came with a back seat either... I really dont know.

Maybe Ron can decipher my description and provide a little insight:  The rear bench seat consists of three pieces with two low, small, square, white-plastic buckets (for lack of a better term) screwed into the deck, open side up, with square padded seats sitting on top (one port / one stbd).  Both buckets have wooden supports on the inboard sides with key slots to hold the center bench seat which fits snugly between the two outboard seats & locks in place with male key pegs on both ends.  When they're all put together it makes a low & surprisingly very sturdy bench seat, but with limited storage of course.  The upside is you can take out the center bench seat for easy on/off over the transom while maintaining the two port & stbd seats in the rear.  No need to take out all the port/stbd seats - pretty ingenious actually, but not sure it was standard or even optional equipment.  The previous owner updated all of the uphostery a year before I bought it and I'm not familiar with the stanard or optional equipment.  The owners manual & 91 brochure have limited details...

Ron,  Any help???
Joel - Columbus, OH - 1991 Advance

Offline RonT

  • Administrator
  • Hero Member
  • *****
  • Posts: 1202
    • RonTanis
  • Boat Make/Model/Year: American Skier/Eagle V-25/2001
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #5 on: February 19, 2010, 09:29:00 AM »
The back seats were always an option back in those days, most boats were sold to tournament skiers who didn't need them, or want them and were not allowed to be used in tournaments. But may bought them & left them in storage until they sold the boat usually into the recreation market. When I left in 1990 the optional seat was a multi-part seat that was designed to allow the two corner cushions in place but the center back & bottom were lift-out sections that could be removed & allow better step-over access to the swimplatform and access to the center floor for maint.

Offline Joel

  • Hero Member
  • *****
  • Posts: 1022
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #6 on: February 21, 2010, 04:22:23 PM »
Thanks Ron...  thats what I have.  Pretty cool setup  :)
Joel - Columbus, OH - 1991 Advance

Offline delbert

  • Newbie
  • *
  • Posts: 4
Re: Looky what I found, Popular mechanics article Nov 1987
« Reply #7 on: March 11, 2010, 08:57:55 PM »
Anyone notice that the Mastercraft had the lowest price in the bunch.  How things change.