« previous next »
Pages: [1]   Go Down

Author Topic: Overheating  (Read 5828 times)

0 Members and 1 Guest are viewing this topic.

Offline Pete

  • Jr. Member
  • **
  • Posts: 5
  • Boat Make/Model/Year: 1980
Overheating
« on: April 21, 2014, 08:32:27 PM »
It started over heating today I turned it off and paddled in. 1980. any suggestions. How easy is it to change the impeller?
thanks
Pete
Logged

Offline shyskier

  • Sr. Member
  • ****
  • Posts: 62
  • Boat Make/Model/Year: american skier advance 88
Re: Overheating
« Reply #1 on: April 22, 2014, 08:25:32 AM »
should be pretty simple. first perform bucket draw test to see if it is pulling in water. make sure you get correct part. ron has some instock at web site with decals. see old post, overheat well covered.
charlie
Logged

Offline Pete

  • Jr. Member
  • **
  • Posts: 5
  • Boat Make/Model/Year: 1980
Re: Overheating
« Reply #2 on: April 22, 2014, 01:20:45 PM »
The impeller was about gone.
thanks
Logged

Offline Daximus

  • Hero Member
  • *****
  • Posts: 104
  • Boat Make/Model/Year: American Skier Advance 1986
Re: Overheating
« Reply #3 on: May 03, 2014, 08:31:17 AM »
Quote from: Pete on April 22, 2014, 01:20:45 PM
The impeller was about gone.
thanks

Mine was in pieces when I got my boat, lol.


FYI, buy two and keep the spare handy, in most cases you can swap them out with quickly with a very limited tool kit. Prevents ruined weekends, ask me how I know. :)
Logged
1986 Advance
Pages: [1]   Go Up
« previous next »