Author Topic: The Messer Log  (Read 98879 times)

0 Members and 3 Guests are viewing this topic.

Messer

  • Guest
Re: The Messer Log
« Reply #30 on: May 27, 2010, 08:07:22 PM »
Here is my "still installed" automotive temp guage. I have the right sending unit but have yet to change this one. This is what is reads after I had her running for a while on the trailer... I have had concerns due to a desintegrated impellar which clogged up my thermostat housing and made her run hot. After I found the problem I have been worried ever since... I took a temp gun and the readings on the manifolds are between 100 and 120 degrees. the Port riser is a little hotter than the Stbd. The heads read around 100 degrees and the intake was a little cooler. Does any of this stand out as a problem to you guys?

Offline phil

  • Gernal Forum Moderator
  • Hero Member
  • ***
  • Posts: 574
    • amskierboats.com
  • Boat Make/Model/Year: 2008 Moomba Outback DD
Re: The Messer Log
« Reply #31 on: May 28, 2010, 09:41:27 AM »
Temp looks about right to me...

Offline Midskier

  • Hero Member
  • *****
  • Posts: 429
  • The Busted Knuckle Garage is always open :)
    • Midwest American Skier Boats Parts and Service
  • Boat Make/Model/Year: the ONLY '86 American Skier Volante Barefoot Skier
Re: The Messer Log
« Reply #32 on: May 28, 2010, 10:28:25 AM »
do you have a 160 t-stat? ............ it should be
Midwest American Skier Boats Parts and Service
**219.365.1466**
www.MidwestAmericanSkier.com
midskier@hotmail.com
Buy Barefoot International / Fly High Products at:
www.FootnGear.com  
AWSA Level 1 Certified Water Ski Instructor

Offline Joel

  • Hero Member
  • *****
  • Posts: 1022
Re: The Messer Log
« Reply #33 on: June 08, 2010, 03:16:13 PM »
O.K.... So where are you at with the restoration project???  Lets see some pics!!!
Joel - Columbus, OH - 1991 Advance

Messer

  • Guest
Re: The Messer Log
« Reply #34 on: August 16, 2010, 11:04:12 PM »
No progress... summer has been shot with BPs mess, now that I think of it, I need gas... anyway, planning to get back to playing in two weeks now that the hole is not gushing. Got leave and will take the boat to Logan Martin regardless of shape, somebody's getting dragged around!

Offline Mike Harry

  • Captain
  • Hero Member
  • *****
  • Posts: 1042
  • 1986 American Skier Barefoot Skier
Re: The Messer Log
« Reply #35 on: August 17, 2010, 04:44:53 AM »
Yeah..... I was told by Ron that no matter what temp T-stat you are running it is hard to get a motor over 130 140ish on the trailer..... period.

Messer

  • Guest
Re: The Messer Log
« Reply #36 on: January 31, 2012, 06:16:22 PM »
Holy cow I just wrote a book and it deleted it... this version will be much shorter..
It's been a while, BP is over for me as I have retired from the USCG and built a house on Logan Martin Lake. I put the boat in the water upon retirement last summer, regardless of problems and ran the stew out of it. We put over 130hrs on her with no real problems (ran oout of gas, damp distributer cap...only). So I'm back on the "get her up to speed kick" and have removed the interior for re-up. Doing this I decided to dig into a soft spot under the driver seat. have a look, do you any problems? ha!

Messer

  • Guest
Re: The Messer Log
« Reply #37 on: January 31, 2012, 06:23:42 PM »
Somebody throw me a bone... how do I upload pix? I tried to add some with the "additional options" then browsed for them (saved to 640x480 or 72k each) but I get the message of " cannot upload...avatar something.

Offline Joel

  • Hero Member
  • *****
  • Posts: 1022
Re: The Messer Log
« Reply #38 on: February 01, 2012, 06:57:36 AM »
Gonna have to hit up Phil for answers on uploading...  He's the IT guy   :)   Glad to hear your back at it and CONGRATULATIONS on your retirement!!!  Bravo Zulu!!  From one Coastie to another!!

Hopefully, we'll be seeing you and your boat at this year's Reunion in TN!!   Gonna be a blast - AGAIN!!

Joel
Joel - Columbus, OH - 1991 Advance

Offline backfoot100

  • Hero Member
  • *****
  • Posts: 446
  • Eddie
  • Boat Make/Model/Year: 86 Barefoot Skier
Re: The Messer Log
« Reply #39 on: February 01, 2012, 07:33:58 AM »
Open up a Photobucket account. It's free. Then you down load your pics to Photobucket. They automaticallly get resized to fit onto the forum. Then you just to hightlight one of th URL addresses for each pic and then copy and paste into the thread. Unfortunately, there are like four different addresses for each pic that you can chose from. I'll get the specific one you want to highlight tonight when I get home because we're blocked from Photobucket at work so I can't access it. I'll post the specifics tonight for you.
It's easy and I have noticed that most here post the Thumbnails. Drives me a bit crazy but it's certainly an option. I prefer to have the full size pic post into the thread. It's much easier fro everyone to view that way IMHO.

When people run down to the lake to see what is making that noise, you've succeeded.

Offline phil

  • Gernal Forum Moderator
  • Hero Member
  • ***
  • Posts: 574
    • amskierboats.com
  • Boat Make/Model/Year: 2008 Moomba Outback DD
Re: The Messer Log
« Reply #40 on: February 01, 2012, 09:31:04 AM »
Somebody throw me a bone... how do I upload pix? I tried to add some with the "additional options" then browsed for them (saved to 640x480 or 72k each) but I get the message of " cannot upload...avatar something.


The media gallery is actually broke right now. I'm trying to find sometime to fix that. Actually, I'm looking to upgrade completely to a new photo gallery entirely. However, you should be able to upload picks into the forum section like backfoot recently did.
« Last Edit: February 01, 2012, 09:40:55 AM by phil »

Offline phil

  • Gernal Forum Moderator
  • Hero Member
  • ***
  • Posts: 574
    • amskierboats.com
  • Boat Make/Model/Year: 2008 Moomba Outback DD
Re: The Messer Log
« Reply #41 on: February 01, 2012, 09:40:26 AM »
I take it back. The permissions were not set correctly on a folder. Try again Messer, you should be able to do it now.

Offline backfoot100

  • Hero Member
  • *****
  • Posts: 446
  • Eddie
  • Boat Make/Model/Year: 86 Barefoot Skier
Re: The Messer Log
« Reply #42 on: February 01, 2012, 05:35:42 PM »
Open up a Photobucket account. It's free. Then you down load your pics to Photobucket. They automaticallly get resized to fit onto the forum. Then you just to hightlight one of th URL addresses for each pic and then copy and paste into the thread. Unfortunately, there are like four different addresses for each pic that you can chose from. I'll get the specific one you want to highlight tonight when I get home because we're blocked from Photobucket at work so I can't access it. I'll post the specifics tonight for you.
It's easy and I have noticed that most here post the Thumbnails. Drives me a bit crazy but it's certainly an option. I prefer to have the full size pic post into the thread. It's much easier fro everyone to view that way IMHO.




When you get the photos downloaded to photobucket, the pic that you download will have options underneath the pic. Click on SHARE under the pic and it opens up another window that gives you options to share with facebook, twitter etc. At the top of that window is a tab labeled "Get Link Code". Click on that. It gives you 4 options. Some of the options have a two additional options (for thumbnail or full size). Click on the fullsize (vs. thumbnail) box labeled "IMG for bulletin boards and forums" and then click SAVE. Once you do this ALL the pics in your photobucket album are labeled with the IMG code for fullsize downloads to forums and bulletin boards.

Now all you have to do when you want to post a pic to a thread is click on that IMG code under the pic you want to post to highlight it. Then you you right click on that highlighted code and click "COPY". Then go back to the thread and right click where you want to insert it and then click "PASTE". The IMG code is pasted into the thread and when you preview it, the fullsize pic is in full view.

I know that it sounds like a lot to do, but once you get all the IMG codes on all of the pics in your album, each time time you post a pic is really easy. Open up a seperate window for Photobucket and one for the forum and you just copy and paste from one to the other. It's repetition for each pic. Once you do it a couple times you'll find it's very easy.

Hope this helps out.
When people run down to the lake to see what is making that noise, you've succeeded.

Messer

  • Guest
Re: The Messer Log
« Reply #43 on: February 04, 2012, 08:21:09 PM »
Lets try this again... when I cracked open the floor, this is what I found. Should I be concerned?  @#$%^&

Messer

  • Guest
Re: The Messer Log
« Reply #44 on: February 04, 2012, 08:25:54 PM »
Since that pic worked, here are a few more...
The stringer felt solid from my small insertion... The other pics are from sliding the cam inside and taking. I see a partition or bulkhead so I'm worried there is water back there as well...heck i'm worried that there is water under the entire floor. I'll never understand why no provision for drainage was made...

So disgusted I left it sitting and took a trip to the mountains, man Little River Canyon in North Alabama is nice... bet I could get a Comp Skier on that lake... 

enjoy my latest issues....  ha, it's all good!