Ski Boat Forum

Buy and Sell => Boat Parts Wanted => Topic started by: keehr22 on January 25, 2011, 09:23:26 AM

Title: Driveshaft for Lazair
Post by: keehr22 on January 25, 2011, 09:23:26 AM

Looking for a drive shaft for an '01 Lazair, not sure what common models use the same shaft

Title: Re: Driveshaft for Lazair
Post by: brandon on January 25, 2011, 07:20:13 PM

I have a shaft out of a Malibu Skier.  Send me a measurement (length from end to end and diameter) and what type of coupling end it has (tapered or square).  I think the one I have is a 1" and it is square ended, about 45" long.  If the end is different but the length is correct, I have the coupler which is a 4" to connect to the trans.  You can also just give me the measurement from the coupler face (on the shaft) to the end and I will see if this matches.  Let me know.

Title: Re: Driveshaft for Lazair
Post by: RonT on January 26, 2011, 07:42:22 AM

Your boat takes a 1.125" dia. shaft, a 1" will not work (part # is TRD-10465)

Title: Re: Driveshaft for Lazair
Post by: keehr22 on January 28, 2011, 05:50:40 AM

Thanks for the part number Ron, any way I could get a price on that Dan?